16
Safety instruction
Caution when cleaning with a high-pressure cleaner
Be careful when cleaning with a high pressure cleaner. Bearings,
seals and pipe unions are not waterproof. Avoid damaging the imple-
ment; the bearings, seals and pipe unions must not come into direct
contact with the high pressure water jets.
No corrosive washing additives
Do not use any corrosive washing additives for cleaning. The bright
metal surfaces can get damaged.
Prior to carrying out welding work
Disconnect all electrical connections from the tractor when carrying
out welding on the attached implement. Damage may otherwise be
caused to the electrical system.
Tighten bolt and screw connections
All screwed/bolted connections that are released during maintenance
and repair operations must be retightened. Serious injuries and dam-
age to property can be caused by loose bolt and screw connections.
Further
regulations
Observe the regulations
In addition to the safety instructions listed above, please observe the
following:
•
Accident prevention regulations.
•
Generally recognised safety regulations, occupational health re-
quirements and road traffic regulations.
•
Instructions given in this operating manual.
•
Regulations pertaining to operation, maintenance and repair.
Warranty
The warranty and manufacturer's responsibility will no longer be valid
if the instructions given in the chapter on Safety are not respected, if
maintenance is inadequate or incorrect, if the implement is overloaded
or used for purposes other than those for which it was intended, or if
unauthorised modifications are made to the implement.
