Pallet packaging
32
Preparing the front
rotary assembly
To carry out further assembly steps, the drawbar must be swivelled
into the correct position on the front rotary assembly. Proceed as
follows.
Lift the front rotary assembly at least 1.50 m using suitable lifting
accessories.
Swivel the drawbar forwards.
Slowly lower the front rotary assembly and guide the drawbar
cylinder to the retainer on the main frame.
Fit the spring on the right-hand side.
Insert the pin on the left-hand side through the retainer and secure
on the inside with a dowel pin.
Further assembly
steps
To carry out further assembly steps, proceed as follows:
See »Fitting the central beam«, page 18.
See »Connecting the front rotary assembly to the central beam«,
page 19.
See »Connecting the hydraulics«, page 22.
See »Additional equipment«, page 33.
See »Final tasks«, page 37.
Spring
Drawbar cylinder
Pin
Dowel pin
Drawbar
Spring
Drawbar cylinder
