Vicon Andex 1104 Скачать руководство пользователя страница 31

Страница: 31 / 43

Adjustment work

Tine lifting

The time for lifting the tines can be adapted to the crop (early or late
lifting). The control cam (cam disc) can be infinitely adjusted. To do
this, the following steps are required.



Switch off the tractor and secure it.



Remove the tine supports via the adjusting screw.



Loosen the adjusting screw on the rotor chassis.



Adjust the control cam.

•

The adjacent illustration shows the position of the adjusting
screw on the right rotor.

•

On the left rotor, the position of the adjusting screw is fitted the
other way round.



Tighten adjusting screw.



Fit and secure the tine supports.

The swath form is affected by the position of the adjusting screw.



Move the adjusting screw in the rotational direction of the rotor:

•

Late lifting of the tines increases the swath width.



Move the adjusting screw against the rotational direction of the
rotor:

•

Early lifting of the tines means that the working speed can be
increased.

Adjusting screw

Early



lifting

Late



lifting

Early



lifting

Late



lifting

Late



lifting

Adjusting screw

Left rotor

Right rotor

Early



lifting

Содержание Andex 1104












































Результаты поиска

Содержание Andex 1104

Отзывы:

Похожие инструкции для Andex 1104

Бренды по названию

Популярные бренды

Vicon Andex 1104, Руководство по сборке

Результаты поиска

Содержание Andex 1104

Отзывы:

Похожие инструкции для Andex 1104

Бренды по названию

Популярные бренды