To Replace Filters
1.
Make sure the unit is turned to the Off
position and the Power Cord is
unplugged from the outlet.
2.
Place the unit on its back.
3.
Remove the Filter Access Door by
simultaneously releasing the two Locking
Tabs. Slide the Filter Cartridge from the
unit by pulling on the handle.
To Replace PreFilter Only
1.
Remove the PreFilter Grille by lightly
releasing the tab on top of the Filter Cartridge followed by the tabs on the bottom. Lift the
Carbon PreFilter from the Filter Cartridge and discard the used Carbon PreFilter.
2.
Remove the new Carbon PreFilter from its packaging and protective polybag and place the
PreFilter squarely on the Filter Cartridge.
3.
Snap the PreFilter Grille into place by engaging the two bottom tabs of the Filter
Cartridge and then the top tab. Make sure all three tabs are engaged.
4.
Slide the Filter Cartridge all the way into the unit and replace the Filter Access Door.
Engage the three tabs first, then make sure both locking tabs are engaged.
5.
Set the unit on a stable, flat surface and plug the power cord into the appropriate wall
outlet.
To replace HEPA Filter:
1.
Remove the Carbon PreFilter as described above. Inspect the Carbon PreFilter, it may
need to be replaced.
2.
Discard the Filter Cartridge (the plastic may be recycled if recycling services are available
in your area.)
3.
Remove the new HEPA Filter Cartridge from its packaging and remove the plastic bag
protecting it.
4.
Install the Carbon PreFilter onto the new HEPA Filter Cartridge as described above.
5.
Slide the Filter Cartridge all the way into the unit and replace the Filter Access Door.
Engage the three tabs first, then make sure both locking tabs are engaged.
6.
Set the unit on a stable, flat surface and plug the power cord into the appropriate wall
outlet.
