Operating Instructions
1.
Fill the Water Tank and place Tank on Base.
2.
Make sure that switch is in OFF (O) position, place the unit on a flat, stable surface and
plug cord into a 120 VAC wall outlet.
CAUTION: DO NOT PLUG IN THE CORD WITH WET HANDS; ELECTRIC
SHOCK COULD RESULT.
3.
Turn switch to desired speed. Green power light will come on. Fan will start turning and
cool mist will be visible within minutes.
4.
Use the humidistat switch to select the humidity level you desire. To increase humidity
turn knob clockwise. When desired humidity level is reached, the humidifier will shut off
and the green “desired humidity” light will come on. The humidistat will automatically
turn the humidifier back on and off again to maintain the humidity level, with the desired
humidity light indicating accordingly.
Scent Pad Heater Instructions
Your Vicks
®
Filter Free humidifier includes a scent pad heater so that you can enjoy Vicks
®
Soothing Menthol vapors to increase your comfort.
a.
Open the lid of the Scent Pad heater tray.
b.
Place one scent pad in the tray, being careful not to touch scent pad with your
hands. If your hands do come in contact with the pad, please wash them thoroughly
as the menthol vapors can be an irritant.
c.
Close lid and turn the unit on.
WARNING: As long as your humidifier is on, the scent pad heater will also be
activated. This area can be warm to the touch.
NOTE:
One complementary scent pad is included with your unit, replace with Vicks
®
VapoPads™, models VSP-19 and VSP-19-CAN, available at most retailers or through Kaz
Consumer Relations or www.kaz.com.
