23
INSTRUCTIONS
Please follow the instructions below in order to use the appliance.
1. Prepare the appliance for use and install all accessories according to the
details of paragraph “INSTALLING & UNINSTALLING OF ACCESSORIES”
after making sure that the appliance is NOT connected to the power supply
and the control switch is in position “0”.
2. Press the release button (4) in order for the mixer head (1) to be lifted.
3. Add the ingredients in the mixing bowl (5).
Make sure not to overfill the bowl. The max quantity is 1,2kg. (example:
800g flour, 400g water)
4. Press the release button (4) and push down the mixer head (1) to be locked
in horizontal position.
5. Connect the appliance to the power supply.
6. Switch on the appliance by turning the control switch (2) to the desired speed
level (between 1 and 6) or use the “Pulse” function.
Always begin the operation of the appliance starting at low speed position
"1" and gradually choose higher speed until you reach the desired level
from 1 to 6.
Use the “Pulse” function for short mixing intervals. Keep the switch in
position “P” in order to activate the “pulse” function. As soon as the
control switch is released (and let return to position “0”) the appliance
stops working.
Please always follow the instructions regarding the speed selection
mentioned below.
7. After mixing the ingredients, set the control switch (2) in position “0” and
disconnect the appliance from the power supply.
8. Press the release button (4) in order to lift the mixer head (1) to be lifted and
remove the mixing accessory (7).
9. Remove the mixing bowl (5) from the bowl bracket (6) by turning it counter-
clockwise.
10. Remove the mixture you prepared from the mixing bowl (5).
11. Clean the appliance and accessories according to the instruction of
“CLEANING” paragraph.
Attention!
Never try to lift the mixer head (1) while the appliance is in operation. If
for any reason you need to lift the mixer head (1), firstly make sure that
you set the control switch (2) in position “0” and disconnect the
appliance from the power supply.