49
9. After you finish processing, turn off the appliance by pressing the “ON / 0 / R”
Switch in position “0” and disconnect the power cord from the power supply.
10. Let the appliance cool down and after that you can disassemble and follow
the cleaning procedure as mentioned in the “CLEANING” paragraph.
CAUTION:
Do not try to process food with hard fiber (for example, ginger or
horseradish) with the appliance.
Never push food into the milling tube (6) with any foreign objects or with your
fingers. Use only the food pusher (17) supplied to you with this appliance.
To avoid obstructions do not apply excessive force while pushing food.
If any hard piece of food stops the screw and blade rotation, immediately
switch OFF the appliance, wait till the screw stops rotating and use the
reverse function by pressing both switches to position “R” in order to remove
the obstruction before starting again. If the obstruction is not removed please
switch off the appliance, disconnect from power supply, disassemble the
accessories and remove the obstruction.
WARNING!
The minced meat mass filling the intestine cannot be “too rare”. Large
amount of fluids can cause their leakage and permeating to the interior of the
mincing machine.
Do not run the appliance for more than 10 minutes continuously.
After 10 minutes of continuous use, switch OFF the appliance and let it cool
down for 10-15 minutes before further operation.
Always keep this routine when you use the appliance in order to keep the
motor life time longer.