Vibratrim VTPRO, Сборка и инструкция по эксплуатации

Страница: 6 / 17

6 | P a g e
Step 2:
There are 10 screws with 10 washers & 10 lock washers in total with five of each on both sides.
Insert all of the screws with the washers only a couple turns first before tightening them, it will make
this task a little easier for you. Tip: Alternate inserting the screws from one side to the other. Also, if
the next screw does not line up perfectly, gently rock the tower back and forth while turning in the
screw. At this point you can go ahead and test your work by plugging in the machine and turning the
power on.
5 M8x16 hex head screws
Insert 5 M8x16 hex head
screws with the lock washers
on the screw first followed by
the flat washers, on each side
before tightening them.
Step 3:
Slide the square cover over the connected parts as shown below.