[email protected] • 25
Field Data Replication Multi-Axis Tests
1. Open FDR Test
2. Enter the Playback file for Loop 1
and Loop 2. To set the Playback for
Loop 2, change the loop you are
viewing from Loop 1 to Loop 2.
3. In the
Channel
tab,
Loop 1 will have Channel 1 as
default control
Loop 2 will have Channel 5 as
default control
Enable Loop 1 and 2 by checking
the boxes. Make the appropriate
changes to control if desired.
4. In the
Schedule
tab enter how long the
test is to run
5. If the recordings are of different lengths,
the shorter ones will repeat more often
Random Multi-Axis Tests
1. Open Random test
2. Enter the Breakpoint Table for Loop 1 and
Loop 2 in the
Table
tab
3. In the
Schedule
tab enter how long the test
is to run
4. In the
Channel
tab, Loop 1 will have
Channel 1 as default control and the default
control for Loop 2 will be Channel 5. Make
the appropriate changes to control, if
desired.
5. Enable Loop 1 and 2 in the
Channels
tab
Содержание VibrationVIEW
Страница 1: ...VibrationVIEW VIBRATION CONTROL QUICK START GUIDE ...
Страница 39: ...support vibrationresearch com 37 ...
