15
4-4 How to Check (Enter) the Coefficient Data
When the GZDSP-2 (or GZVDSP-1) board is replaced, or the coefficient data is lost due to
static electricity, etc., reenter the coefficient data according to the following procedure.
1. Location of the coefficient data label
2. How to read the data sheet
Data sheet
(Figure 4-3)
* After replacing the mechanical
unit, put the data sheet for the
new unit on top of the old data
sheet.
Tuning fork No.
Program No.
Adr. 60 to 66, from the left
Adr. 67 to 6D, from the left
Adr. 6E to 74, from the left
Adr. 75 to 7B, from the left
Adr. 7C to 82, from the left
Adr. 83 to 85, from the left
(Figure 4-4)
