4-1 How to Calibrate
-47-
6
Place the weight on the pan.
After zero-point adjustment finishes and the
display changes to “
”, place the weight
on the pan.
Adjustment starts.
7
Span adjustment starts.
After display changes to the blinking of “
”, span adjustment starts.
8
Span adjustment finishes.
After span adjustment finishes, “
” is
displayed.
The balance goes back to normal display.
参 考
-
Pressing any other key than the [Function] key cancels adjustment.
- The
“
” display indicates that you used a weight weighing less than 50% of the
weighing capacity.
- The
“
” display indicates that an error over 1.0% was detected, or the balance
failed. For more information, refer to “Section 7-2: Troubleshooting” (P. 76).
Reference
