AMPLIFIER CONNECTIONS & CONTROLS
A. LOW LEVEL INPUT
Low level input for connection to any source (headunit) with a low level output. This is your RCA
output from the source (headunit).
B. HIGH LEVEL INPUT
To be used when no RCA’s are available. Use the provided loom to connect to the closest
speakers.
C. GAIN CONTROL
Used to match the input signal of the source (headunit) to the amplifi er. See the
setup section
for
more details.
D. CROSS OVER FREQUENCY CONTROL
High pass frequency control. The frequency ranges from 50 Hz to 250 Hz.
E. BASS BOOST CONTROL
To provide up to an extra +12 dB of bass boost at 45 Hz. Use this boost to increase bass output
from the amplifi er.
F. FUSE
Please ensure the following fuse rating is used when replacing fuses:
SLICK SLR12A (20 amp)
G. POWER CONNECTIONS
Power connections. See
input connections
section for details on correct connections.
H. POWER PROTECT LIGHT
When the amplifi er is operating correctly the light will illuminate constant ‘white’. When the amplifi er
is in power protecttion mode the light will illuminate ‘red’.
H
A
E
B
C
F
D
G
6
Slick SLR 12 Active Limited Edition Subwoofer Enclosure
Содержание Slick SLR 12 Active Limited Edition
Страница 11: ......
Страница 12: ...twitter com vibeaudio youtube com vibeaudio PJO 7 PO MJOF ...
