Introduction
This manual is for your safety and must be adhered to at all times, please read this manual and ensure that you fully
understand the installation and set up procedures explained in this manual before any work on the vehicle is attempted.
If you have any doubts about the installation of the VIBE QB69 speakers please contact your nearest authorised VIBE
dealer.
Contents
2 x QB69 speakers
2 x 2 way passive crossover units with speaker cable
2 x ABS grills
12 x mounting screws
1 x mounting template
Standard features
20% more cone area than conventional 6 x 9 speakers due to unique rectangular shape Ultra stiff IMPP injection moulded
polypropylene woofer cone. New aluminium POWER TWEETER delivers ultra extended high frequency response.
Subwoofer motor structure allows massive power handling and delivers boosted powerbassTM Separate screw down
input terminals for woofer and tweeter for maximum system flexibility. A new revised and unique grill design. The new grill
protects the speaker whilst showcasing their unique attributes and styling.
2 way passive crossover with speaker cable included.
WARNING
DO NOT EXPOSE THIS PRODUCT TO DAMP OR MOISTURE - doing so may result in fire, shock or damage to the product.
BEFORE WIRING DISCONNECT THE CABLE FROM THE POSITIVE BATTERY TERMINAL - failure to do so may result in
electric shock or injury.
ENSURE GOOD AND CORRECT CONNECTIONS - failure to make the correct connections may result in fire or damage to
the product.
DO NOT USE FUNCTIONS OF THIS EQUIPMENT THAT MAY TAKE YOUR CONCENTRATION AWAY FROM DRIVING YOUR
VEHICLE - do not set up your amplifier whilst driving, doing so may result in an accident. For prolonged setting up, make
sure that your vehicle is stationary and in a safe location.
KEEP THE VOLUME AT A LEVEL SO YOU CAN STILL HEAR OUTSIDE NOISE - failure to do this may result in an accident.
VIBE equipment is capable of producing sound levels that can permanently damage your hearing. VIBE recommends
caution when listening at high volume. For safe and enjoyable listening the sound should be comfortable and clear without
distortion.
CAUTION
Never connect any speaker lead to the car chassis. This can cause severe damage to your speaker /car radio /amplifier.
Before drilling or cutting any holes, investigate the layout of your vehicle thoroughly.
Use caution when working near the fuel / hydraulic lines and electrical wiring.
Observe the correct polarity when wiring, improper phasing may cause a loss of bass response.
Ensure that no moving parts catch on the speaker or grill (e.g. window or door handles, or window glass inside the door)
Installation
The quality of the installation will affect the system performance and reliability.
Contact your nearest authorised VIBE dealer if you are unsure on the installation of this product.
Please mount this unit away from any potential hazards.
Minimising the length of wires will provide higher audio output from the system.
The speaker should be securely fastened to the mounting position using the screws provided.
Pre drill your mounting holes using a drill and position with the template provided.
Be sure to investigate your mounting area thoroughly for electrical wires, brake or fuel lines or fuel tank to prevent causing
any damage.
Firstly make sure that the speakers will fit in your chosen location. This may involve the removal of the standard vehicle
speakers. Please use the mounting depth and hole cut dimensions as detailed in this manual for guidance.
