background image

Owners Manual

Caution

Attention

Warning

Congratulations on purchasing your VIBE bass enclosure. Please read this manual in 

order to fully understand how to get the best results from this product and ensure that 

all advice on how to look after the product is followed.

Thank you for buying VIBE, we hope you enjoy listening to your product as much as 

we enjoyed creating it.

• Do not expose this product to damp or moisture - doing so may result in damage to  

   the product.

• Before wiring disconnect the cable from the positive battery terminal - failure to do   

   so may result in electric shock or injury.

• Ensure good and correct connections - failure to make the correct connections may 

   result in fire or damage to the product.

• Do not use any functions of this equipment that may take your concentration away  

   from driving your vehicle - do not set up your amplifier whilst driving, doing so may 

   result in an accident.

• For prolonged setting up, make sure that your vehicle is stationary and in a safe 

   location.

• Keep the volume at a level so you can still hear outside noise - failure to do this may 

   result in an accident. 

• VIBE equipment is capable of producing sound levels that can permanently damage 

   your hearing.

• VIBE recommends caution when listening at high volume.

• For safe and enjoyable listening the sound should be comfortable and clear without 

   distortion.

An aftermarket audio amplifier will place an additional load on the vehicles charging 

system.

Most modern vehicles have sufficient capacity in the charging system as not all the 

electrical components of the vehicle will be switched on at once.

Check the fuse rating of the amplifier and use this as the peak current requirement.

Generally the continuous current draw will be a third of the peak current.

During the normal use of this amplifier the heatsink may become very hot.

Please do not touch during or immediately after use.

Please ensure that when installing this product the heatsink will not come into contact

with any materials that may be damaged by heat such as upholstery or plastics.

2

Содержание PULSE Series













Отзывы: