Installation guide
• Remove vehicle door card carefully, please ensure that all
screws and clips are correctly removed and retained
• It is recommended that a set of good quality plastic trim
removal tools are used in order to prevent damage to the
door card that can be caused by using improper tools such
as a large flat head screwdriver.
• Recommended VIBE trim removal set CLTRT-V7.
Contact your authorised VIBE for more information.
• Unplug factory speaker cabling.
• remove factory speaker and housing from door / door card
making sure to retain all fixing hardware.
•
Note :
It may be necessary to drill out rivets in order to
remove the factory speaker, please take care when using
power tools so as not to damage the vehicle and ensure
protective eyeware is worn.
• Apply the Anti-Vibe sound deadening material to the outer door
skin directly behind where the speaker is to be mounted.
• Please ensure that the area is clean and free from grease
before application and applied with a hard roller and heatgun
/ hair drier in order to achieve the best adhesion.
• Recommended VIBE dampening roller CLDR-V7.
Contact your authorised VIBE for more information.
• Apply the disc of VIBE wave diffuser over the top of the sound
deadening material.
• Attach the vehicle specific adaptor ring to the door / door card.
Note :
No screws or fixings are supplied for the adaptor ring as
every vehicle will require different mounting hardware and in most
cases will require the factory speaker fixings to be used.
2
