19.
Connect the T-Crimp connectors to the
stereo front speaker output wires. Take
special care to ensure the polarity is
correct so power correctly flows
through the tweeter crossover. If unsure
refer to your stereo user guide or wiring
diagram. (Tweeter wiring, Black/White
–
Po, Black
–
Negative -)
Note: Failure to complete this step
correctly may result in damage to the
tweeter
20.
Add the bullet connectors provided to
the tweeter connector provided taking
note of the polarity. Red connects to the
tweeter wire (black/white) and black
connect to the tweeter wire (black)
21.
Cut back the tweeter wiring ensuring
the crossover/capacitor remains in-line
with the positive wire (Black/White).
Add the blue bullet connectors provided
and connect to the tweeter connector.
Ensure the Polarity is correct and
connected as below
Tweeter
Tweeter Connector
Black/White to Red
Black
to Black
Note: Failure to complete this step
correctly may result in damage to the
tweeter
22.
Reconnect the tweeter in the vehicle
and secure the tweeter mount using the
T15 screw previously removed. Test for
correct operation and refit the dash
cover
Vehicles WITH factory fitted Tweeters
