Vibe OPTI8VWT5-V0 Скачать руководство пользователя страница 11

Страница: 11 / 11

Additional Upgrade Options Available

Want to upgrade your sound further…Why not amplify your speakers or add a
subwoofer for a whole new listening experience. Please visit

www.vibeaudio.co.uk

for more information.

Tel: 0121 311 9090

Email: [email protected]

POWERBOX65.4M-V7

Super compact 4 channel amplifier

4 X 65 Watts RMS

Simple plug & play installation

No need to install separate power and speaker wires

Plug in-line with an original or aftermarket stereo

POWERBOX400.1M-V7

Ultra-compact 400 RMS / 800W Peak mono amplifier

Simple installation using the Rapid Fit wiring kit
(RAPAWK5M & RAPAWK2.5M)

Can be used with the original or aftermarket stereo

Perfectly matched to our compact subwoofer enclosures

OPTISOUNDAUTO8-V2

Slimline 8” passive or active enclosure

Ported enclosure technology

Designed to fit the smallest of spaces

Perfect for adding bass without compromising space

OPTISOUNDAUTO8A-V2

Built in 300W RMS / 900W Peak Amplifier

Amplifier wiring included

BLACKAIRT12S-V6

Slimline 12” passive radiator subwoofer enclosure

Ultra-slim profile

Dual 4 Ohm voice coil configuration

300W RMS / 900W Peak

PULSEC8-V0

Ultra-compact under seat enclosure

compact and slimline design

Cast aluminium housing

6x8 inch subwoofer

80W RMS / 240W Peak

Содержание OPTI8VWT5-V0












Результаты поиска

Содержание OPTI8VWT5-V0

Отзывы:

Похожие инструкции для OPTI8VWT5-V0

Бренды по названию

Популярные бренды

Vibe OPTI8VWT5-V0, Инструкция по установке

Результаты поиска

Содержание OPTI8VWT5-V0

Отзывы:

Похожие инструкции для OPTI8VWT5-V0

Бренды по названию

Популярные бренды