08
www.viavito.com
R
Before You Begin
Before beginning assembly, carefully
read the following information and
instructions:
• Assembly requires two people.
• For help identifying small parts, use the
Part Identification Chart
(page 7).
• Place all parts in a cleared area and
remove the packing materials. Do not
dispose of the packing materials until
assembly is completed.
• Tighten all parts as you assemble them,
unless instructed to do otherwise.
• As you assemble the power tower, make
sure all parts are oriented as shown in
the drawings.
• The following tools (not included) are
required for assembly:
- 2 adjustable wrenches
- 1 rubber mallet
- 1 standard screwdriver
- 1 Phillips screwdriver
Assembly will be more convenient if you
have a socket set, a set of open-end or
closed-end wrenches, or a set of ratchet
wrenches.
Important: Some of the parts described in
the assembly steps may be pre-assembled.
