Viavi Xgig Maestro Скачать руководство пользователя страница 12

Страница: 12 / 42

About This Guide

Technical Assistance

Xgig Maestro Introduction Guide

Page x

Version 8.1

November 2015

Technical Assistance

If you require technical assistance, call 1-844-GO-VIAVI (1-844-468-4284) or
e-mail

[email protected]

For the latest TAC information, go to

http://www.viavisolutions.com/en/services-and-support/support/technical-assistance

Table 3

Safety definitions

Term

Definition

DANGER

Indicates a potentially hazardous situation that, if not avoided,

will

result in death or serious injury. It may be associated with either a
general hazard, high voltage, or other symbol. See

Table 2

for more

information.

WARNING

Indicates a potentially hazardous situation that, if not avoided,

could

result in death or serious injury. It may be associated with either a
general hazard, high voltage, or other symbol. See

Table 2

for more

information.

CAUTION

Indicates a potentially hazardous situation that, if not avoided, could
result in minor or moderate injury and/or damage to equipment.

It may be associated with either a general hazard, high voltage, or risk
of explosion symbol. See

Table 2

for more information.

When applied to software actions, indicates a situation that, if not
avoided, could result in loss of data or a disruption of software opera-
tion.

ALERT

Indicates that there is an action that must be performed in order to
protect equipment and data or to avoid software damage and service
interruption.

Содержание Xgig Maestro











































Результаты поиска

Содержание Xgig Maestro

Отзывы:

Бренды по названию

Популярные бренды

Viavi Xgig Maestro, Руководство по введению

Результаты поиска

Содержание Xgig Maestro

Отзывы:

Бренды по названию

Популярные бренды