You use logical partitioning policies with geographic locations and geographic location filters to provision
logical partitioning.
For more information on how to use the Logical Partitioning Policy Configuration window, see the
Cisco
Unified Communications Manager System Guide
.
Call Control Discovery Setup
In Cisco Unified Communications Manager Administration, use the
Call Routing
>
Call Control Discovery
>
Feature Configuration
menu path to configure call control discovery feature parameters.
External Call Control Profile Setup
In Cisco Unified Communications Manager Administration, use the
Call Routing
>
External Call Control
Profile
menu path to configure external call control profiles.
Video QoS Reservation Setup
This feature is limited to use in lab environments for demonstration purposes only. Cisco Technical
Assistance Center (TAC) does not provide support for this feature.
Note
The Video Quality of Service (QoS) Reservation feature reserves bandwidth in a mobile network, through a
third party HTTP service, when a mobile device makes a call. This reservation is only for VoIP calls made
through Cisco Unified Communications Manager, not for other voice calls already classified by the mobile
network as voice calls.
For each device with its MSISDN configured, Unified Communications Manager requests its connection type.
If the connection type for the device is supported, Unified Communications Manager reserves the bandwidth
with its MSISDN and the connected IP address. A video call has two reservations, one for the audio portion
and one for the video portion, both with the QoS Class Identifier (QCI) value set to 2. An audio call has one
reservation, with the QCI value set to 1.
This feature only supports Unified Communications Manager SIP line side devices, such as CSF client (Jabber
for Tablet) and Cius.
To enable the Video QoS feature, use the
System
>
Service Parameters
menu path to configure the parameters
for the device. In the
Clusterwide Parameters
section, set
External QoS Enabled
to True.
To configure a MSISDN for the device, use the
Device
>
Phone
menu path. Enter the MSISDN in the
Mobile
Subscriber ISDN(MSISDN)
field.
HTTP Profile
Use the
Call Routing
>
HTTP Profile
menu path to configure an HTTP profile.
Cisco Unified Communications Manager Administration Guide, Release 10.0(1)
6
OL-29000-01
Other Call Routing Menu Options
Call Control Discovery Setup
