OLT-85/OLT-85P
59
9 M
EASURING
L
OSS
WITH
S
OURCE
/P
OWERMETER
S
AVING
L
OSS
TEST
RESULTS
Fig. 21 Result overview over two wavelengths
Saving Loss test results
Before starting a measurement a project must be selected and
set to active. Thus, all results are assigned to that project when
saved. If no project was defined by the user, the instrument will
use the Test-Tool project “default”, which is always present (see
“Managing projects” on page 35).
Results are stored simply by pressing the
[
G
]
key. Each time the
key is pressed, the result just displayed will be saved.
NOTE:
Test results are always stored on the local instrument, even when
the storage is operated from the remote instrument. Hence
stored test results can be recalled from the local instrument only.
To save current results:
I
The instrument is in application mode and displays the test
results (overview or details) to be stored.
1.
Press the
[
G
]
key.
The Save dialog is displayed.
As file name the label prefix defined in the project settings is
showed on top of the display.
2
4
1
2
3
