42
OLT-85/OLT-85P
6 L
OSS
T
EST
O
PERATION
V
IEWING
TEST
RESULTS
Fig. 14 Performing the measurement
Viewing test results
The measured loss is displayed in real time.
Fig. 15 Result overview
Saving Loss test results
Before starting a measurement a project must be selected and
set to active. Thus, all results are assigned to that project when
saved. If no project was defined by the user, the instrument will
use the Test-Tool project “default”, which is always present (see
“Managing projects” on page 35).
Results are stored simply by pressing the
[
G
]
key. Each time the
key is pressed, the result just displayed will be saved.
TX
Laser source output (Transmitter)
RX
Powermeter input (Receiver)
F
Fiber system under test
F
TX
RX