Viavi Seeker X, Руководство пользователя

Страница: 38 / 66

Seeker X User’s Guide
22137808, Rev. 001 Feb 2020 38
Chapter 2 Using Your Seeker X
Viewing the battery charge level
To check the battery level, turn your Seeker X on and press the SELECT button once.
y
When the battery charge level display is selected, the Battery icon flashes as shown
here.
y
When this display is selected, the following will occur:
y
The bar graph will indicate the amount of battery
charge available. As long as there are at least a
few bars left, your Seeker X has enough charge to
operate.
If the battery meter shows less than 50%, the
Seeker X should be charged.
y
The numerical display will continue to display the
RF signal level.
Using your Seeker X
While testing for leaks, you will need to view the information shown by the Seeker’s display
modes.
y
Use the SELECT button to toggle
through its display modes. As you
toggle, the display modes will
appear in the same order in which
they are discussed in this section.
y
Use the CHANGE button to adjust
the settings of some display
modes. Also toggles frequency
presets from the measurement
screen (press once to view, twice to
change).
NOTE:
The display will revert to the signal level display after a few
seconds in the battery charge level display (without any
action by the user).
Battery charge level
SEEKER X
μV
m
dB
NOISE
FREQ PK DIST GPS