Viavi Seeker MCA III, Руководство по установке

Страница: 11 / 16

MCA III Install Guide
22137818, Rev. 001 Jan 2020 11
Seeker Mobile Mount & MCA III assembly
The following steps show how to install the Seeker MCA III onto the bottom of the Seeker or
Seeker X Mobile Mount.
For these examples, we show assembly of the Seeker Mobile Mount, but the same process is
used for the Seeker X Mobile Mount.
1. Remove the two 1/4” Screws (1) from the bottom of the Mobile
Mount (2) that are closest to the front of the mobile mount, as
shown here.
Discard these screws, they are no longer needed.
2. Align the ridges on the top of the Seeker
MCA III (3) with the slots in the bottom of the
mobile mount (2) and then place the bottom
of the Seeker MCA III against the bottom of
the mobile mount as shown here.
3. Slide the Seeker MCA III (3) forward until the Alignment
Tab (4) comes into contact with the back side of the
mobile mount (2).
4. Insert and tighten the two 1-1/4” Screws (included) into the
mounting holes (5) on the bottom of the Seeker MCA III as shown
here. To prevent damage to the Seeker MCA III housing, don’t over
tighten the screws.