Seeker HL User’s Guide
Document Num., Rev. 2
May 2018
Page 33
Appendix
Chapter 6
Specifications
Operation Specifications
Monitored
Frequencies
Low:
138 MHz
High:
757.5 MHz
Calibrated Level
Range
0.1 to 1000 μV/m @ 60 dBmV Transmit Level
Physical Specifications
Construction
Plastic housing, with rubber overmold
Control
Front panel rubber keypad
Display
Dual numerical readout of detected low and high-frequency leakage within sensitivity
range
Speaker
Tone is present if leakage amplitude exceeds squelch setting
Pitch is proportional to strength of leak
Dimensions
(H x W x D)
7.50 x 3.25 x 1.50 in (191 x 83 x 38 mm)
Weight
1.0 lbs (454 grams)
Available Interface Types
Antenna
BNC Type connector with dual-band antenna
USB
Mini-B Port for charging & configuration using Seeker Setup Software
Battery & Power Specifications10
Operating Time
8 hours plus, dependent on use
Charge Time
10 hours
Battery
Single 2600 mAh @ 3.7V Li-Ion internal battery, factory replaceable
Power Adapter
Input:
100 to 240 VAC ~ 50 to 60 Hz, 0.3A Max
Output:
5 VDC, 1.0A
Environmental Specifications
Storage &
Operating
Temperature
Storage:
-40˚ to +70˚ C (-40˚ to 158˚ F)
Operating:
-20˚ to +50˚ C (-4˚ to 122˚ F)
Power Adapter
Input:
100 to 240 VAC ~ 50 to 60 Hz, 0.3A Max
Output:
5 VDC, 1.0A
Environmental Specifications
Storage &
Operating
Temperature
Storage:
-10˚ to +70˚ C (-40˚ to 158˚ F)
Operating:
-20˚ to +50˚ C (-4˚ to 122˚ F)
