Viavi MSAM, Руководство пользователя

Страница: 25 / 74

Chapter 1 Basic Testing
Step 5: Viewing test results
Data Communications and Diphase Testing Manual
January 2016 21148872, Rev. 002 Page 9
The test starts.
Step 5: Viewing test results
Test results appear in the Results Windows of the Main screen.
Setting the result group and category
To set the result group and category
1 Using the Test menu, select a test interface, configure your test (see “Step 1:
Configuring the test” on page 6 ), then perform a self test (see “Step 2: Performing
a self test” on page 7 ).
2 Connect your instrument to the circuit (see “Step 3: Connecting the instrument to
the circuit” on page 8 ).
3 Use the Group and Category buttons to specify the type of results you want to
observe.
Figure 3 illustrates buttons for a standard HS Datacom application.
Results for the category you selected appear in the result window.
4 Optional . To observe results for a different group or category in another result
window, press the buttons at the top of the window to specify the group and cate-
gory.
For descriptions of each result, refer to Chapter 4 “Test Results” .
NOTE: Running Multiple Tests
If you are using two MSAMs with HS Datacom PIMs in a DMC (Dual Module
Carrier), you can run two HS Datacom tests simultaneously. For details and
constraints, refer to the Getting Started manual that shipped with your instru-
ment.
Figure 3 Result Group and Category buttons (HS Datacom application)
TIP:
If you want to provide a screen shot of key test results, on the Main screen,
select
Tools > Take Screenshot . A screen shot will be captured and stored as
a JPG file in the
acterna/user/disk/bert/images
folder. You can
include the screen shot when you create reports.