Quick Start Guide: FiberChek™ Sidewinder MPO Inspection Probe
Page 11
Document Num. 22122621, Rev. 100
December 2017
Chapter 3
Operation
3
Setting up PASS/FAIL Analysis for Multi-fiber Connectors
Step 1.
From the Live Inspection View, tap the Touchscreen Display to enter the Menu.
Step 2.
Select CONNECTOR SETUP using the Manual Focus/Navigation Control, then press the Action
Button. (See Figure 1)
Step 3.
Choose the desired inspection profile using the Manual Focus/Navigation Control, then press the
Action Button. (See Figure 2)
Figure 1
Figure 2
