8 — © 2021 Viavi Solutions (30 Apr 2021)
Caution:
Do not pick up the server by the front
handles. They are designed to pull the system from a
rack only.
1.
Align the chassis rails with the front of the rack rails.
2.
Slide the chassis rails into the rack rails, keeping the
pressure even on both both sides. You may have to depress
the locking tabs while inserting. When the server has been
pushed completely into the rack, the locking tabs should
"click" into the locked position.
3.
If screws are used, tighten the screws on the front and rear
of the outer rails.
4.
(Optional) Insert and tighten the thumbscrews that hold
the front of the server to the rack.
How to remove the server from the rack
Caution:
It is dangerous for a single person to off-load
the heavy chassis from the rack without assistance. Be
sure to have sufficient assistance supporting the chassis
when removing it from the rack. Use a server lift.
1.
Pull the chassis forward out the front of the rack until it
stops.
2.
Press the release latches on each of the inner rails
downward simultaneously and move the chassis forward in
the rack.
Technical Support
Please contact technical support if your issues are not
represented or you need further help.
North America
+1 800 526 7919
South America
+1 800 526 7919
EMEA
+44 1 959 569 880
APAC
+44 1 959 569 880
All Other
Regions
viavisolutions.com/contacts
(North/
South America)
(EMEA/
APAC)
Web page and
documentation
support
(Please
include the web link in your email)
Support hours are 7:00 A.M. to 7:00 P.M. CST/CDT (for North
and South America) and 8:00 A.M. to 5:00 P.M GMT (EMEA
and APAC).
