Viavi Apex Enterprise G3-APEX-ENT-32T Скачать руководство пользователя страница 369

Страница: 369 / 380

Chapter 17: Backups and Restoring

Multiple portions of the GigaStor appliance can be backed up and restored. If

necessary, you can also use the Gigastor System Restore kit to re-image your

entire GigaStor to factory settings.

Backups and Restoring

Multiple portions of the GigaStor appliance can be backed up and restored. If

necessary, you can also use the Gigastor System Restore kit to re-image your

entire GigaStor to factory settings.

Exporting GigaStor data for archiving

You can export your GigaStor -collected data on a scheduled basis. This can be

done for archival or backup purposes.
Use the Export tab to configure when and to where your data is saved or to

manually export your data. You can manually export your GigaStor data in

several file formats or you can schedule Observer to export the data.
Part of what makes the GigaStor searches so quick is that the data is indexed.

Any data that is exported to a file is saved, but unindexed. The data remains

in the indexed GigaStor file until it is overwritten. The exported data is always

available and means you will still have access to the saved packet data, but you

must load the capture file into the analyzer before you can search it. Having a

good naming convention can help you find your files later.

Note:

This process should be completed on the GigaStor probe itself by

having the software running in Observer mode rather than Expert Probe.

See

Switching between the probe and analyzer user interfaces

. This may

require that you use Remote Desktop to access the system.

Redirect the probe instance to the local analyzer if it is not already connected

to it.

Содержание Apex Enterprise G3-APEX-ENT-32T





























































































































































































































































































































































































Результаты поиска

Содержание Apex Enterprise G3-APEX-ENT-32T

Отзывы:

Viavi Apex Enterprise G3-APEX-ENT-32T, Руководство пользователя, Страница: 369 / 380

Результаты поиска

Содержание Apex Enterprise G3-APEX-ENT-32T

Отзывы: