VIAVI//Public
T-BERD/MTS 2000 Handheld Modular Test Set
T-BERD/MTS-2000 Handheld Modular Test Set
Q U I C K C A R D
2
C O N N E C T TO F I B E R U N D E R T E S T ( F U T )
All fibers and connectors should be inspected and
clean prior to connection, as described on page 1.
The OTDR may be connected to the FUT via an
optical patch panel (OPP) or a coupler:
1.
Inspect the OTDR port on top of the test set.
2.
Inspect the fiber end face of the Launch Cable.
3.
Connect the Launch Cable to the OTDR port.
4.
If the interface to the FUT is a patch cord,
connect the patch cord to an optical coupler.
5.
Inspect the FUT connected to the coupler or
OPP port and the fiber end face of the Launch
Cable.
6.
Connect the Launch Cable to the coupler or
OPP port.
Figure 5: Connecting to OPP
L A U N C H T E S T
1.
Press the ON/OFF button to start the test
set.
2.
Press the Home button to display the
Home view with the EXPERT OTDR icon.
3.
Tap the
EXPERT OTDR
icon until it is
yellow and highlighted.
Figure 6: Fiber Optics Home Screen
Figure 4: Connecting to coupler
Figure 3: OTDR Port Inspection
