Viatron Agri Alert 400, Руководство пользователя

Страница: 5 / 16

5
AA-400 rev.02
1.3 Mounting the Equipment
The AA-400 alarm system and the battery box
should be mounted on a wall as shown in the
figure below. Pull the latch located at the
bottom of the boxes to open the enclosures.
Use 3/16” (4.75 mm) diameter screws to
mount each enclosure on the wall. Fasten the
black caps onto the mounting holes once the
screws are tightened. Make sure the covers of
the two boxes can be opened easily.
The battery enclosure has ventila-
tion openings on the sides. Make
sure they are not obstructed.
Battery Box
6” (150 mm)
plastic tubing
cable
holder cable
holder
Alarm System
6 3/8”
(162 mm)
149 mm)
5 7/8”
(
4 1/2”
(115 mm)
6 3/8”
(162 mm)
5 7/8”
(149 mm)
Mount the battery enclosure 4 1/2” (115 mm)
from the AA-400 enclosure. Use the plastic
tubing provided to run the wires from the
battery to the alarm system. These wires are
provided with the system. The bare end hooks
up to the AA-400 alarm system.
Pass all wiring through the bottom of the
enclosure. Do not drill holes on the side or the
top of the enclosure as this may allow water to
enter the enclosure. Use a hammer and a
screwdriver to punch holes through the bot-
tom of the enclosure.
1 2 3
4 5 6