ViaSat Series 8345, Руководство по установке

Страница: 15 / 76

Chapter 2 - Installation
2.8 Recommended Tools And Equipment
Table 2-1 lists the tools and equipment required for efficient and convenient
installation.
Table 2-1. Tools and Equipment Required For Installation
Quantity Description
1 Set Combination wrenches 1/4-inch to 1 1/2-inch size including 15/16-inch
2 Each Alignment pins 1/8-inch and 1/2-inch taper
1 Each 3/4-inch spud wrench
1 Each 3 lb. hammer
1 Each Pry bar
1 Each Band cutter
1 Each 12-foot stepladder
1 Each 6-foot stepladder
1 Each Torque wrench, 7-9 ft-lbs (9-12 Nm)
1 Each Torque Wrench, 15-20 ft-lbs (20-27 Nm) 1/4-inch to 3/8-inch drive
1 Each Torque wrench, 150 ft-lbs (203 Nm)
1 Each Torque wrench, 250-300 ft-lbs (333-400 Nm) 3/4-inch drive
1 Each Small Allen wrench set
1 Each Medium Allen wrench set
1 Each Large Allen wrench set
1 Each 1/2-inch Allen wrench
1 Each Torpedo level
1 Set Electrical tools (screw drivers, nut drivers, pliers, crimp tool, line-man pliers, needle
nose pliers, channel lock pliers)
1 Set 3/8-inch drive ratchet set
1 Each Grease gun with cartridges
1 Each 1/2-inch drive ratchet set with 15/16-inch socket and 3/4-inch deep well socket
1 Each 3/4-inch drive ratchet with a 1 1/8-inch, 1 1/4-inch, 1 1/2-inch, 1 7/8-inch sockets
and 6-inch extension
1 Each Angle finder or magnetic base inclinometer
1 Each 1/4-inch diameter drill
1 Each 1/2 hp drill motor
42S199F
2-5