P
ULSE
P
OWER
&
MEASUREMENT LTD
12
4
System Integration
Initial set up equipment
For initial set up you will require:
A small flat bladed screw driver (1.8mm to 3.0mm tip) to actuate DIP switches
A small flat bladed screw driver (1.8mm to 3.0mm tip) to push the catch of the 6 way relay connector
Wire cutters and stripper to prepare wires for insertion into the 6 way relay connector
Suitable stranded 14
– 22 AWG wire to interface to the 6 way relay connector
Full set up details are given in section 3
Site requirements
The site will require the following services, to make full use of the
ViaLiteHD
equipment:
Power source of rack chassis
19” enclosure
Interface cables / patch panels
