
Video Wall Mini User Manual
Video Wall Mini User Manual
Video Wall Mini User Manual
Video Wall Mini User Manual
23
4.
4.
4.
4.
Onboard Jumpers
Onboard Jumpers
Onboard Jumpers
Onboard Jumpers
Jumper Description
Jumper Description
Jumper Description
Jumper Description
A jumper consists of pair conductive pins used to close in or bypass an
electronic circuit to set up or configure particular feature using a jumper cap.
The jumper cap is a small metal clip covered by plastic. It performs like a
connecting bridge to short (connect) the pair of pins. The usual colors of the
jumper cap are black/red/blue/white/yellow.
Jumper Setting
Jumper Setting
Jumper Setting
Jumper Setting
There are two settings of the jumper pin: “Short
Short
Short
Short and Open
Open
Open
Open”. The pins are
“Short
Short
Short
Short”””” when a jumper cap is placed on the pair of pins. The pins are ”O
”O
”O
”Open
pen
pen
pen”””” if
the jumper cap is removed.
In addition, there are jumpers that have three or more pins, and some pins are
arranged in series. In case of a jumper with three pins, place the jumper cap on
pin 1 and pin 2 or pin 2 and 3 to Short
Short
Short
Short it.
Some jumper size is small or mounted on the crowded location on the board
that makes it difficult to access. Therefore, using a long-nose pliers in installing
and removing the jumper cap is very helpful.
Figure
Figure
Figure
Figure 23
23
23
23: Jumper settings example
: Jumper settings example
: Jumper settings example
: Jumper settings example
Caution:
Caution:
Caution:
Caution:
Make sure to install the jumper cap on the correct pins. Installing it in the wrong pin might cause
damage and malfunction.