VIA Technologies VIA P4XB-RA Скачать руководство пользователя страница 78

Страница: 78 / 81

Driver Setup

4-7

C-Media CMI8738 Audio Driver (P4XB-RA)

C-Media CMI8738 is an audio controller for PCI sound cards. With high speed
PCI V2.1 bus controller and legacy audio SBPro

DSPemulator, CMI8738 is

designed for PC add-in cards and all-in-one motherboards. No external CODEC
is needed in CMI8738: CMI-8738 supports the legacy audio -- SBPRO

, FM

emulator/DLS wavetable music synthesis, and HRTF 3D positional audio func-
tions.

Features

•

PCI Plug and Play (PnP) bus interface. 32-bit PCI bus master.

•

Full-duplex playback and recording. Built-in 16-bit CODEC.

•

HRTF 3D positional audio, supporting both DirectSound 3D

& A3D

interfaces. Also supports earphones, 2/4/6 channel speakers mode.

•

Support Windows 98 /Windows 2000 and Windows NT 4.0.

•

Built-in 32 OHM earphone buffer.

•

MPU-401 Game/Midi port and legacy audio SB Pro support.

•

Downloadable Wave Table Synthesizer, supporting Direct Music

•

Stereo Mixer
- Stereo analog mixing from CD-Audio and Line-in.
- Stereo digital mixing from Voice, FM/Wave-table, and Digital CD-Au-

dio.

- Mono mixing from MIC. Software adjustable volume.

•

Game and MIDI Interface
- Fully compatible with MPU-401 Midi UART and Sound Blaster Midi

mode/Standard IBM PC joystick/game port (dual channels).

Содержание VIA P4XB-RA


















































































Результаты поиска

Содержание VIA P4XB-RA

Отзывы:

Бренды по названию

Популярные бренды

VIA Technologies VIA P4XB-RA, Руководство пользователя

Результаты поиска

Содержание VIA P4XB-RA

Отзывы:

Бренды по названию

Популярные бренды