VAB
VAB
VAB
VAB----820
820
820
820 A
A
A
A
ndroid
BSP v
BSP v
BSP v
BSP v4
4
4
4.0.2 Quick Start Guide
.0.2 Quick Start Guide
.0.2 Quick Start Guide
.0.2 Quick Start Guide
8
2.3.
Restoring Default U-Boot Parameters
If the U-Boot parameters have been modified, the “destroyenv” command in the U-Boot
console can restore the factory default settings. To restart the device, use the “reset”
command.
=> destroyenv
=> saveenv
=> reset
2.4.
Using the Android Console
The first step is to connect the host machine and the VAB-820 through the COM 2
(connector J5). Use a serial port communication program such as PuTTY, GtkTerm, or
Minicom, to connect to the debug console. There you will be able to see the U-Boot boot
log and adjust settings in the U-Boot console. Next, power on the VAB-820 to initiate the
boot process. When the boot process is completed you will be prompted to login.
COM 2 (connector J5) diagram
COM 2 (connector J5) diagram
COM 2 (connector J5) diagram
COM 2 (connector J5) diagram
When the boot process is completed, you will automatically log in to an Android console.
root@vab820_6dq:/ #
