manualshive.com logo in svg

VIA Technologies P4XB-MA, Руководство пользователя

Поделиться
Скачать
VIA Technologies P4XB-MA Скачать руководство пользователя страница 74

Chapter 4

4-2

VIA Apollo P4X266A Chipset Drivers

The VIA P4X266A chipset provides superior performance between the CPU,
DRAM, V-Link bus and AGP 8x graphics controller bus with pipelined, burst
and concurrent operation. With a highly integrated PCI/LPC controller, its
internal bus structure is based on 66MHz PCI bus that provides 2x bandwidth
compared to previous generation PCI/ISA bridge chips.

Features

•

Integrated Ultra DMA 33/66/100 master mode PCI EIDE controller.

•

 Full featured Accelerated Graphics Port (AGP) controller
- Supports 533MHz 8x and 266MHz 4x transfer modes for AD and SBA

signaling.

- Pseudo-synchronous with the host CPU bus with optimal skew control.
- Windows 95 OSR-2 VXD and integrated Windows 98/NT5 miniport

driver support.

System Requirements

Computer

Intel

®

 Pentium

®

 4 processors

Monitor

VGA Support, minimum 640 x 480 resolu-
tion

Operating system

DOS 5.0 or higher, Windows

®

 95/98, Win-

dows

®

 NT3.51 or 4.0, or OS/2

®

, Windows

®

2000, or Windows

®

 ME

CD-ROM

Double speed or higher

Chipset

VIA Apollo P4X266A chipset

Содержание P4XB-MA

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды