Hardware Setup
2-13
2-pin single color power LED:
The power LED is not able to change its
color. Therefore, you can only choose
Blinking
in the BIOS utility for
the power LED to indicate the suspend/sleep mode.
2-pin dual color power LED:
The 2-pin power LED can change its color
to indicate different system states. Therefore, you can select either
Blinking
or
Dual (color)
for the power LED to show the suspend/sleep
mode.
HDD LED
The HDD LED shows the activity of a hard disk drive connected to the IDE1 or
IDE2 connector. Avoid turning the power off while the HDD is working. You
can connect the HDD LED from the system case to this pin.
LED Status
Description
Steady Green
The system is in the full-on mode.
Blinking
The system enters the suspend/sleep mode.
z
When you select
Blinking
:
LED Status
Description
Steady Green
The system is in the full-on mode.
Steady Orange
The system enters the suspend/sleep mode.
z
When you select
Dual (color)
:
