2
Hardware Installation
21
2.4 Jumper Settings for Wake-On-PS/2 Keyboard
Wake-On-PS/2 Keyboard - Jumper JP1
The Wake-On-PS/2 Keyboard function allows you to use the PS/2
keyboard to wake up the system from the S5 state. By default, JP1
is disabled. To use this function, set JP1 to 2-3 On. “PS2KB Wakeup
Select” (“IRQ/Event Activity Detect” field) in the Power Management
Setup submenu of the BIOS must be set accordingly. Refer to
chapter 3 for details.
Warning:
1. If you forgot the password, you must power-off the system,
unplug the power cord and clear the CMOS data. Follow
the steps in the “Jumper Settings for Clearing CMOS Data”
section.
2. The 5VSB power source of your power supply must
support
≥
720mA.
2-3 On: Enable - 5VSB
1-2 On: Disable - VCC
(default)
1
2
3
1
2
3
