10
VIA Mobile360 D700 EVK Quick Start Guide
7. Start the vehicle to power on the VIA Mobile360 D700 device. After the device finishes booting, there will be a short beep followed by the notification “Scan
registration QR code”. After the audio notification, there is a 60-second window to scan the QR code from the app.
8. In the app, tap on the vehicle in the list to generate a QR code that is used to bind the D700 device.
9. Place the QR code in front of the DSS camera lens of the VIA Mobile360 D700 device.
10. Once the D700 device has scanned the QR code, the device will play the audio confirmation, “Registration successful”.
11. Tap on “OK” on the pop-up notification to return to the vehicle list where it will show “Registered” beside the vehicle name.
Note:
If the QR code is not successfully scanned within the 60-second window, the VIA Mobile360 D700 device will play the audio notification “Registration Failed”. If this occurs, reboot the system
and start over.
12. Log back into the VIA Fleet Cloud Management Portal and go to “Management -> Vehicles”. Click the Fleet in the list and select the vehicle which was registered. There
will be three new sections of vehicle information added to the vehicle information page.
