VIA Technologies EPIA-V Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 66

VIA Technologies EPIA-V Скачать руководство пользователя страница 65

Chapter 4

4-2

Driver Utilities CD Content

Getting Started

The VIA EPIA-V mainboard includes a Driver Utilities CD which contains
driver utilities and software to enhance the performance of the mainboard.
Please check that you have this CD in your gift box. If the CD is missing in
your gift box, please contact your local dealer for the CD.

Note

: The driver utilities and software are updated from time to time. Please

visit VIA’s website (http://www.viamainboard.com/) for the latest updated
driver utilities and software.

Running the Driver Utilities CD

To start using the CD, just simply insert the CD into your local CD-ROM or
DVD-ROM drive. The CD should run automatically when you close your CD-
ROM or DVD-ROM drive. The driver utilities and software menu screen
should then appear on your desktop. If the CD does not run automatically,
you can run the CD manually by typing “D:\Setup.exe” at Start\Run.

(Please note that D: might not be your CD-ROM/DVD-ROM drive’s letter.
Make sure you type the correct letter of CD-ROM/DVD-ROM drive on your
system).

CD Content

Upon running the CD, the following driver utilities and software menu screen
appears as follow:

«
...
63
64
65
66
»

Содержание EPIA-V



































































Отзывы:

Нет отзывов