manualshive.com logo in svg

VIA Technologies EPIA-V, Руководство пользователя, Страница: 42 / 66

Поделиться
Скачать
VIA Technologies EPIA-V Скачать руководство пользователя страница 42

BIOS Setup

3-9

Floppy

The system will boot from floppy drive.

LS120

The system will boot from LS-120 drive.

HDD-0

The system will boot from first HDD.

SCSI

The system will boot from SCSI.

CD-ROM

The system will boot from CD-ROM.

HDD-1

The system will boot from second HDD.

HDD-2

The system will boot from third HDD.

HDD-3

The system will boot from fourth HDD.

ZIP100

The system will boot from ATAPI ZIP drive.

            

USB-FDD

The system will boot from USB floppy drive.

            

USB-ZIP

The system will boot from USB ZIP drive.

            

USB-CDROM

The system will boot from USB CDROM.

            

USB-HDD

The system will boot from USB HDD.

LAN

The system will boot from network drive.

Disabled

Disable this sequence.

Boot Other Device

Enable the system to boot from other devices if the system fails to boot from
the First/Second/Third boot device. Settings: 

Enabled

 and 

Disabled

.

Swap Floppy Drive

If the system has two floppy drives, choose enable to assign physical drive B
to logical drive A and vice-versa. Settings: 

Enabled 

and 

Disabled.

Boot Up Floppy Seek

Set floppy seek during POST, BIOS will determine whether the floppy is 40 or
80 tracks. Settings: 

Enabled

 and 

Disabled

.

Boot Up NumLock Status

Set the NumLock status when the system is powered on. “On” will turn key
pad into number keys, and “Off” will turn key pad into arrow keys. Settings: 

On

and 

Off

.

Gate A20 Option

The option, Fast, allows the chipset to control Gate A20, and the Nomal op-
tion makes a pin in the keyboard controller control Gate A20. Settings: 

Fast

and 

Normal

.

Содержание EPIA-V



































































Отзывы:

Нет отзывов