34
3-8-1 Wake Up Events
Phoenix – AwardBIOS CMOS Setup Utility
Wake Up Events
Item Help
VGA Off
LPT&COM LPT/COM
HDD&FDD ON
PCI Master OFF
Wake-Up on Ring/LAN Disabled
Wake-Up on PCI PME Disabled
PS2KB Wakeup Selection Hot Key
Wake-up on hot key(PS2KB) Disabled
Wake-up on USB Devices Disabled
Wake-Up on RTC Alarm Disabled
> IRQS Activities Press Enter
Menu Level >>
↑↓→←
Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Wake Up by PCI PME
This will enable the system to wake up to PCI LAN Card.
The settings are: Enabled and Disabled.
Power On by Ring/LAN
During Disabled, the system will ignore any incoming call from the modem/LAN. During
Enabled, the system will boot up if there’s an incoming call from the modem/LAN.
Wake-Up on RTC Alarm
This function is for setting date and time for your computer to boot up. During Disabled,
you cannot use this function. During Enabled, choose the Date and Time Alarm:
Date(of month) Alarm
You can choose which month the system will boot up. Set to 0, to boot every day.
Time(hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
Note:
If you have change the setting, you must let the system boot up until it goes to the
operating system, before this function will work.
