VIA EPIA-M930 User Manual
43
6.7.2 PCH-IO Configuration
The PCH-IO (Platform Control Hub IO) Configuration screen shows a list of categories that can provide access to
sub-screens. Sub-screens can be selected by using the Up and Down arrows on the number pad.
Aptio Setup - AMI
Version 2.22.1282 Copyright (C) 2022 AMI
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
PCH-IO Configuration
SATA Configuration
HD Audio Configuration
State After G3
Enable TCO Timer
PinCntrl Driver GPIO Scheme
[S0 State]
[Disabled]
[Enabled]
SATA Device Options Settings
Chipset
Figure 57: Illustration of the PCH-IO Configuration screen
The PCH-IO Configuration screen contains the following links and options:
•
SATA Configuration
•
HD Audio Configuration
•
State After G3
− Specify what state to go to when power is re-applied after a power failure (G3 state).
•
Enable TCO Timer
− Enable/Disable TCO timer. When disabled, it disables PCH ACPI timer, stops TCO timer, and ACPI
WDAT table will not be published.
• PinCntrl Driver GPIO Schem
e
− Enable/Disable PinCntrl Driver GPIO Scheme
