VIA EPIA-M930 User Manual
36
6.6.5 SIO Common Setting
This SIO (Super IO) Common Setting screen shows options to enable/disable the locking of Legacy Resources.
Aptio Setup - AMI
Version 2.22.1282 Copyright (C) 2022 AMI
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables or Disables Lock of
Legacy Resources
Disabled
Enabled
Lock Legacy Resources
SIO Common Setting
Wake system from S5
[Disabled]
Advanced
Figure 47: Illustration of the SIO Common Setting screen
6.6.6
SIO Configuration
The SIO (Super IO) Configuration screen shows a list of categories that can provide access to sub-screens. Sub-
screens can be selected by using the Up and Down arrows on the number pad.
Aptio Setup - AMI
Version 2.22.1282 Copyright (C) 2022 AMI
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
View and Set Basic properties
of the SIO Logical device.
Like IO Base, IRQ Range, DMA
Channel and Device Mode.
AMI SIO Driver Version : A5.15.00
Super IO Chip Logical Device(s) Configuration
[*Active*] Serial Port 1
[*Active*] Serial Port 2
[*Active*] Serial Port 3
[*Active*] Serial Port 4
WARNING: Logical Devices state on the left side of the
control, reflects the current Logical Device state. Changes
made during Setup Session will be shown after you restart
the system.
Advanced
Figure 48: Illustration of the SIO Configuration screen
