Input http://192.168.100 to IE ( better with IE web
browser, others will cause little latency), a login
window pop up, input login name: admin, password:
admin, shown as below:
After login shown as below:
VHD-J1600SE
D ATA S H E E T - M A N U A L
Method 2: Open “upgrade_En.exe”, change
IP and click “Set”.
NOTE!
IP camera default IP address”192.168.100.
88”, user “admin”, password “admin”.
After modified, IP Camera be restart.
NOTE!
If user first time use this camera by internet (only
for new user), must install a player software (VLC).
Please go to VLC webside: http://www.videolan.org/
vlc,download and Install VLC (player software).
After installation, login again, will show as above:
>
VISIT/ACCESS IP CAMERA
> IP CAMERA ACCESSED/
CONTROLLED BY WAN (internet)
> SETUP IPC ACCESSED/
CONTROLLED BY DYNAMIC DNS
2 DYNAMIC DNS AVAILABLE:
Dyndns.org, 3322.org.
ROUTER PORT MAPPING:
Take TP-LINK router for example, enter Router Home
Page (interface page), select “Transit control”- “Transit
rule”--”Virtual server”-- “Virtual service”, add a new
port number in “Outside Port”, add a new port
number in “inside port”, put camera IP address to “IP
address”, then select “Apply” and “Add”, shown as
below: (sorry, we do not have English Version TP-Link
here, so put the Chinese Version picture for reference,
the position is the same).
Set domain name to camera, setup the parameter,
then dynamic DNS can access camera.
Access link: http://hostname: port number For
example, setup host computer name: youdomain.
f3322.org, camera port number: 554,Access link
should be: http://youdomain.3322.org:554.
> DYNAMIC DNS VISIT CAMERA
