VHD-J1600SE
D ATA S H E E T - M A N U A L
> NETWORK SETTING, PLEASE
CLICK “NETWORK”
> DOWNLOAD THE NETWORK
UPGRADE PROGRAM
> MAINTENANCE AND
TROUBLESHOOTING
“NETWORK”
1) LAN SETTINGS
Default the IP address is 192.168.100.88,
The MAC address can be modified.
2) PORT SETTINGS
A. HTTP Port:
IP address identifies the network device, the
device can run multiple web applications, each
network program using network port to
transmit data, so data transmission to be
carried out between the port and port. Port
setting is to set up WEB SERVER program
using which port to transmit. When port
mapping, need to be consistent with the port
number (default port: 80).
B. RTSP Port:
Network camera support RTSP protocol, use
the VLC tools broadcast.
C. PTZ Port:
Support PTZ protocol, default port: 5678.
3) CONTROL PROTOCOL SETTING
Setting camera control communication protocol,
include Visca address, Pelco-D address,
Pelco-P address.
If you need the camera upgrade program,
please contact the manufacturer.
MAINTENANCE OF THE CAMERA
If the camera is not used for a long time, after use,
please disconnect the power switch, at the same time
the ac power adapter and ac socket to disconnect.
Clear the dust on the camera housing, please use soft
cloth or cotton paper.
Clean the camera lens, please use dry soft cloth to
wipe, such as dirt serious when, please use neutral
detergent wipe gently.
Don’t use strong or with corrosive cleaner, so as to
avoid the lens scratches, influence the image effect.
4) RTMP Setting
Setting the camera stream, can set up two stream,
in the two stream selection control code stream of
“On”, “Off”, “Video”, “Audio”, etc.
5) RTSP Setting
Setting network camera rtsp protocol of “On”, “Off”.
6) ONVIF Setting
Setting the ONVIF protocol and ONVIF authorization
“On”, “Off”.
7) MULTICAST SETTING
Setting multicast “On”, “Off”, and multicast address
(default address 224.1.2.3) and port (default 6688).
8) APPLY / CANCEL
Modify network parameters then press “Apply”
button to modify network parameters, press “Cancel”
button to cancel network parameters.
6.5 Device Information, please click “information”
Show the current device information, as shown below.
