Koryuu Transcoder Quick Start Guide
VideoGamePerfection.com
Overview
Koryuu Transcoder Front
Option Button –
This button is reserved for options available in future firmware updates.
Currently, pressing the button will toggle a smoothing filter, but this feature is not correctly
implemented yet.
Input change button
– Press this button to cycle through the input modes. There are currently four
input modes:-
1. Composite video (CVBS)
2. Composite video + pedestal (7.5 IRE mode)
3. S-Video (YC)
4. S-Video + pedestal (7.5 IRE mode)
When powered on, the Koryuu defaults to input mode 1. Press the Input change button to cycle
through the available modes. When in mode 4, pressing the input change button again will cycle
back to mode 1.
7.5 IRE mode may be required for certain sources (e.g video cassettes). If the picture is too light, try
7.5 IRE mode.
Composite video in
– Connect a standard composite video (CVBS, usually a single yellow cable)
to this input.
Page 4
