EN
BL530 PH/RX DOSAGE SYSTEM |
11
UV-C and Pool equipment
OPERATION OF THE ELECTRONIC UNIT
To access the configuration, calibration and manual mode menus, press the
CAL button. The display will show the following available options:
• Standard Configuration.
• Advanced Configuration.
• Calibration IN1 (input 1) pH.
• Calibration IN2 (input 2) redox.
• Manual Mode 1 (pump 1, acid dosage).
• Manual Mode 2 (pump 2, chlorine dosage).
Use the
/
keys to scroll the available options, then press CAL to enter the
highlighted mode or ESC to return to measurement visualization.
For a complete list of parameters, valid values and related explanations,
see the “List of Configuration Parameters” section.
Standard Configuration
The standard configuration mode allows the customer to set a series of parameters related to the
normal functioning of the unit. These parameter can be freely accessed and configured from the
front keyboard.
1. Once selected the “Standard Configuration" option, press the CAL button to edit the list of
parameters, or press ESC to return to the ESC to return to the normal visualization mode.
2. Now use the
and
keys to scroll the list of the available parameters.
3. To modify the displayed parameter, press CAL; to quit the mode press ESC.
Advanced Configuration
The advanced configuration mode also includes the parameters protected by password, that
allow a complete configuration of the system. This mode is normally accessed only by authorized
technical personnel.
1. Once selected the “Advanced Configuration” option, press the CAL button to edit the list of
parameters, or press ESC to return to the normal visualization mode.
2. Now use the
and
keys to scroll the list of the available parameters.
3. To modify the displayed parameter, press CAL; to quit the mode press ESC.
S
T
A
N
D
A
R
D
C
O
N
F
I
G
.
C
A
L
>
Y
E
S
E
S
C
>
N
O
P
0
1
F
U
N
C
.
T
Y
P
E
P
1
O
N
O
F
F
A
D
V
A
N
C
E
D
C
O
N
F
I
G
.
C
A
L
>
Y
E
S
E
S
C
>
N
O
