Network Video Recorder Quick Start Guide
9
No.
Name
Description
●
Advances the video by a single frame in single-frame playback
mode.
●
Stops/starts auto switch in auto-switch mode.
DIRECTION
●
Navigates between different fields and items in menus.
●
In the playback mode, use the Up and Down buttons to speed up
and slow down recorded video. Use the Left and Right buttons to
select the next and previous video files.
●
Cycles through channels in live view mode.
●
Controls the movement of the PTZ camera in PTZ control mode.
6
USB interfaces
Universal Serial Bus (USB) ports for additional devices such as USB
mouse and USB Hard Disk Drive (HDD).
1.1.2 24 CHANNELS NVR
Figure 1. 2 24 CHANNELS NVR Series
Table 1. 2 Panel Description
No.
Name
Description
1
Power switch
Powers on/off device.
2
Status indicator Power
Solid blue indicates device is powered on. Solid red indicates
device is shut down.
HDD
●
Solid red: at least one HDD is installed
●
Unlit: no HDD is detected.
●
Blinking red: HDD is reading/writing.
Tx/Rx
Blinking blue indicates network communication is normal.
Ready
Solid blue indicates device runs properly.
Alarm
Solid red indicates alarm occurs.
3
USB interface
Universal Serial Bus (USB) ports for additional devices such as
USB mouse and USB Hard Disk Drive (HDD).
4
Panel lock
Locks or unlocks the panel by the key.
5
HDD sequence indicator
Shows the HDD installation slot.
